37 Old Hutt Road
(04) 499 4415


27 Te Puni Street
(04) 568 5570


5a MacDonald Street
Mt Maunganui
(07) 575 7755


280 Annex Road
(03) 343 3893


Tiles on Devon
9 Devon Rd, Frankton
(07) 846 9399

East Tamaki

21 Neilpark Drive
(09) 273 0151


117 Wairau Road
(09) 443 5633

Artica Endura Nube Porcelain Pavers 20mm 605x605mm

Italian Gres Porcelain Stoneware.
The Artica Endura porcelain paver range features a 20mm porcelain thickness which is structually suitable for Multipod installations.

The product can also be installed in a sand screed substrate like a paver or be installed as a normal tile over traditional substrates.

Using the best Italian technology, the Artica range features variation from piece to piece to give you the most natural looking surface.

This range has many other options.
Natural and Lappato finishes for interior use to create indoor and outdoor flow.

Manufactured in Italy to premium standard.

Samples are only $3.90 plus delivery.

Product Information

Material: Porcelain
 Surface Finish: Antislip
 Edge Finish: Rectified
A rectified edge is mechanically finished on sides to achieve uniform size and optimum precision which allows a smaller grout joint.
A cushioned edge is the same as pressed edge and is traditional and has minor roll/arc on the edges.
 Size (mm): 605x605
Sizes stated are nominal sizes.
Area per product (m2): 0.365
 Glaze PEI Abrasion Resistance: Grade 4

Grade 0 = Wall use only
Grade 1 = Light duty domestic bathroom floors
Grade 2 = Light duty domestic home with soft footware
Grade 3 = All residential & light commercial areas
Grade 4 = All residential & medium – heavy commercial areas
Grade 5 = All Public buildings, shopping malls – extreme use
  Exterior Anti-slip Rating:
The common adopted measure for exterior tiles is the “Oil Wet Ramp Test” which reports as “R” followed by a number. Ranges from R9 - R13. As a rule of thumb R10 and higher is acceptable for exterior wet areas. A higher number means more anti-slip.
 Variation: V3

V1 = Uniform appearance from tile to tile
V2 = Slight variation from tile to tile
V3 = Features moderate variation from tile to tile
V4 = Features substantial variation from tile to tile
Weight (kg per m2): 45
 Sealing Required: N
Some unglazed and natural products require sealers to keep the surface easy to clean and keep the product maintained. Tilemax imports many polished porcelain tiles that feature a “nano technology” sealed surface to save the sealing requirement after installation, hence these products do not require sealing. However after prolonged use or extreme wear these products may require resealing to maintain the surface.
Colour: Grey

Product Order

Price per square metre ($): 139.90
Number of square metres required:
 Cutting Allowance:
Total Cost ($):

Total Order Quantity: 
Total Order Amount: 
Unit Amount: 
Next Shipment Date: 
Current Stock: 
Indent Code: 
Min Purchase Qty: 
Stock On Order less indented: 

My Shopping Cart




Copyright © 2018 Tilemax